Tripp Lite par Eaton B127A

Works with Tripp Lite B127A-Series receivers to extend a 4K audio/video signal 230 ft. via Cat6 cable to 8 HDMI displays.\n\nFeatures | HDMI Multi-Output Splitter Ideal for Digital Signage in Schools and Workplaces \nThis 4K transmitter/splitter is recommended for video presentations in conference rooms, schools, trade shows

meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.\n\nExtends a 4K A/V Transmission up to 230 ft. (70.1 m)... or Even Farther\n The B127A-008-BH connects to Tripp Lite B127A-Series receivers to extend 4K signals from an HDMI source to eight HDMI displays up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding Tripp Lite B127A-010-H signal repeaters or B127A-110-BH transceivers (each sold separately) to the application, you can extend the signal to each connected display up to 400 feet (121.9 meters) or 460 feet (140.2 meters), respectively.\n\nTransmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color\n The B127A-008-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with true uncompressed 7.1-channel digital audio and Dolby TrueHD. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This splitter also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.\n\nMulti-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions \nSay you have a brand new 4K/60 Hz HDTV in one room, but want to also connect your Blu-ray player or satellite box to an older 1080p TV in another room. The B127A-008-BH is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching, allowing each connected monitor to display video at its maximum resolution.\n\nLocal HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution \nTo monitor the video signal being extended to the receiver, connect a 4K display to the splitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.\n\nBuilt-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks\nPower over Cable (PoC) technology powers the connected receivers over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers where needed without worrying about finding a nearby AC outlet.\n\nPlug-and-Play Operation for Quick Setup and Immediate Use\n The splitter works right out of the package with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the splitter to an HDMI source device with a usersupplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the splitter to Tripp Lite B127A-Series remote receivers with user-supplied Cat6 cable (such as Tripp Lite's N202-Series).\n\nTAA-Compliant for GSA Schedule Purchases \nThe B127A-008-BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.Split CATV and other signals with this satellite splitter so that it can be used for more than one device3840 × 2160 resolution for high-quality video deliveryHDMI interface allows you to connect to a variety of HD devices for the ultimate true high-definition video

Garantie standard du fabricant, le cas échéant

Politiques

!00% nous sommes toujours en dessous du prix du marché.