Partager
Security & Alarm Systems
Expected delivery 3 to 7 business days (exceptions applied)
Elk Products
Capteur d'eau sans fil Elk avec sonde de 1,8 m pour Qolsys 319,5 MHz (ELK-319WA)
Capteur d'eau sans fil Elk avec sonde de 1,8 m pour Qolsys 319,5 MHz (ELK-319WA)
Capteur d'eau sans fil Elk avec sonde de 1,8 m pour Qolsys 319,5 MHz (ELK-319WA)
VPN : ELK-319WA SKU : AT880097 UPC : 762158190100
Bloc de texte
Impossible de charger la disponibilité du service de retrait
Remise sur volume disponible - Demandez un devis.
Afficher tous les détails
Recently Viewed
Capteur d'eau sans fil Elk avec sonde de 1,8 m pour Qolsys 319,5 MHz (ELK-319WA)
Résumé des informations sur le produit

À propos du produit
The ELK-319WA is a Supervised, Wireless Water Sensor designed so that the transmitter mounts on a wall or other flat vertical surface, and the remote probe is placed in the location where water leakage is most probable.
Moisture forming a bridge between the two metallic contacts on a remote probe is all that is needed for the unit to signal an alarm condition. The output on the ELK-319WA will remain in alarm state until the moisture bridge is broken. As sensitive as the water sensor is, it will not alarm due to high humidity or condensation. The ELK-319WA is ideal for use in homes, offices, computer rooms, warehouses, etc.
Compatible with E27 Alarm Engine, M1 Controls, and other systems that support 319.5 MHz wireless devices.
ELK-319WA Water Sensor Features and Benefits:
- Water detection when liquid makes contact with the probe
- Contacts above floor level to prevent false floor condensation detection
- Checks for water constantly, requires two positive checks for a valid alarm
- Compatible with ELK’s E27 Alarm Engine and M1 Controls, as well as other system utilizing the 319.5 MHz frequency
ELK-319WA Water Sensor Specifications:
- RF frequency: 319.5 MHz
- Compatibility: ELK E27 and M1 Receivers/Panels & other panels that operate on the 319.5MHz Freq.
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Code Outputs: Tamper, Tamper Restore, Alarm, Alarm Restore, Low Battery
- Operating Temp Range: 32° to 122°F (-40° to 60° C)
- Dimensions Transmitter: 2.71” H x .95” W x .56” D, Probe: .7” W x 1.77” L x .38” D
- Cable Length 72”
Note: The ELK-319WA water sensor is not a self- contained warning sensor device. For proper operation, it must be used in conjunction with a compatible learn-mode 319.5 MHz alarm control panel. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
Spécifications techniques
The ELK-319WA is a Supervised, Wireless Water Sensor designed so that the transmitter mounts on a wall or other flat vertical surface, and the remote probe is placed in the location where water leakage is most probable.
Moisture forming a bridge between the two metallic contacts on a remote probe is all that is needed for the unit to signal an alarm condition. The output on the ELK-319WA will remain in alarm state until the moisture bridge is broken. As sensitive as the water sensor is, it will not alarm due to high humidity or condensation. The ELK-319WA is ideal for use in homes, offices, computer rooms, warehouses, etc.
Compatible with E27 Alarm Engine, M1 Controls, and other systems that support 319.5 MHz wireless devices.
ELK-319WA Water Sensor Features and Benefits:
- Water detection when liquid makes contact with the probe
- Contacts above floor level to prevent false floor condensation detection
- Checks for water constantly, requires two positive checks for a valid alarm
- Compatible with ELK’s E27 Alarm Engine and M1 Controls, as well as other system utilizing the 319.5 MHz frequency
ELK-319WA Water Sensor Specifications:
- RF frequency: 319.5 MHz
- Compatibility: ELK E27 and M1 Receivers/Panels & other panels that operate on the 319.5MHz Freq.
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Code Outputs: Tamper, Tamper Restore, Alarm, Alarm Restore, Low Battery
- Operating Temp Range: 32° to 122°F (-40° to 60° C)
- Dimensions Transmitter: 2.71” H x .95” W x .56” D, Probe: .7” W x 1.77” L x .38” D
- Cable Length 72”
Note: The ELK-319WA water sensor is not a self- contained warning sensor device. For proper operation, it must be used in conjunction with a compatible learn-mode 319.5 MHz alarm control panel. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
Comparaison de produits
Garantie du produit
Garantie standard du fabricant, le cas échéant
Politique de retour
Garantie de prix
!00% nous sommes toujours en dessous du prix du marché.
Explorez les collections de marque
Nos services

Devenez notre partenaire
Racontez l'histoire de votre marque à travers des images

Éthique et intégrité des affaires élevées
Racontez l'histoire de votre marque à travers des images

Cohérence et performance ciblée
Racontez l'histoire de votre marque à travers des images

Vision partagée et succès partagé
Racontez l'histoire de votre marque à travers des images

Haute confidentialité et sécurité
Racontez l'histoire de votre marque à travers des images