À propos du produit
The M1XRFTWM two-way wireless transceiver allows an ELK M1Gold or M1EZ8 control to accept Elk’s complete line of two-way wireless sensors. Two-way wireless provides signal quality feedback as well as status feedback and enables advanced features.
This model is also multiple receiver capable, meaning that unlike its predecessor the M1XRFTW, it’s able to filter out duplicate transmissions and recover from memory issues should they ever occur. This is especially handy in very large buildings where signals can overlap if the receivers are not spaced apart far enough.
ELK-M1XRFTWM 2 Way Wireless Transceiver for Elk Sensors Features:
- New and improved design filters out duplicate transmissions and can recover from memory issues if they occur
- Allows up to 144 individual wireless zones (sensors/points)
- Operates from the 4 wire RS-485 Data Bus
- Multiple receivers may be connected to a single M1 or M1EZ8 control for redundancy and greater coverage
- Compatible with Elk complete line of Two-Way Wireless Sensors
- Flash memory for firmware updates
- Operating Frequency: 902 Mhz to 928 Mhz
- Sensitivity: >105 dbm
- Operating Temperature: 0 to 49 degrees C
- Operating Voltage: 12 Volts DC
- Current Draw: 25mA receiving, 85mA transmitting
- Housing Dimensions: 6.75” x 4.69” x 1.13”
**Replacement for the ELK-M1XRFTW**
Spécifications techniques
The M1XRFTWM two-way wireless transceiver allows an ELK M1Gold or M1EZ8 control to accept Elk’s complete line of two-way wireless sensors. Two-way wireless provides signal quality feedback as well as status feedback and enables advanced features.
This model is also multiple receiver capable, meaning that unlike its predecessor the M1XRFTW, it’s able to filter out duplicate transmissions and recover from memory issues should they ever occur. This is especially handy in very large buildings where signals can overlap if the receivers are not spaced apart far enough.
ELK-M1XRFTWM 2 Way Wireless Transceiver for Elk Sensors Features:
- New and improved design filters out duplicate transmissions and can recover from memory issues if they occur
- Allows up to 144 individual wireless zones (sensors/points)
- Operates from the 4 wire RS-485 Data Bus
- Multiple receivers may be connected to a single M1 or M1EZ8 control for redundancy and greater coverage
- Compatible with Elk complete line of Two-Way Wireless Sensors
- Flash memory for firmware updates
- Operating Frequency: 902 Mhz to 928 Mhz
- Sensitivity: >105 dbm
- Operating Temperature: 0 to 49 degrees C
- Operating Voltage: 12 Volts DC
- Current Draw: 25mA receiving, 85mA transmitting
- Housing Dimensions: 6.75” x 4.69” x 1.13”
**Replacement for the ELK-M1XRFTW**
Comparaison de produits
Garantie du produit
Garantie standard du fabricant, le cas échéant
Politique de retour
Garantie de prix
!00% nous sommes toujours en dessous du prix du marché.
Explorez les collections de marque
Nos services
