À propos du produit
The Fibaro Micro Dimmer 2 is a universal module for controlling virtually any sort of lighting load. It can be used as a dimmer with dimmable LED, CFL, incandescent and halogen lighting. It can be used for on/off control of non-dimming CFL or fluorescent lights. The module has the ability to calibrate itself to match the load type. The Micro Dimmer 2 also supports energy monitoring when used with compatible automaton systems.
The tiny size allows the Micro Dimmer 2 to be installed behind a standard wall switch in the junction box allowing regular wall switches and decorator switches to be Zwave enabled. The Micro Dimmer 2 is Zwave plus enabled so it can be used with a Zwave or Zwave Plus enabled automation controller.
The Micro Dimmer 2 may be used in a 3 wire or 2 wire (without neutral) installation.
Note: When used with LED or CFL loads, a FGB-002 module must also be purchased and installed (sold separately).
The tiny size allows the Micro Dimmer 2 to be installed behind a standard wall switch in the junction box allowing regular wall switches and decorator switches to be Zwave enabled. The Micro Dimmer 2 is Zwave plus enabled so it can be used with a Zwave or Zwave Plus enabled automation controller.
The Micro Dimmer 2 may be used in a 3 wire or 2 wire (without neutral) installation.
Note: When used with LED or CFL loads, a FGB-002 module must also be purchased and installed (sold separately).
Fibaro FGD-212-ZW5 Zwave Universal Micro Dimmer 2 Features:
- Zwave plus and Zwave enabled (500 series chip on board)
- Supports dimming operation for dimmable LED, CFL, incandescent and halogen lighting
- Supports on/off operation for non-dimming LED and CFL and fluorescent lights
- Automatic light type detection supporting leading edge and trailing edge dimming
- Installs behind your wall switch
- Soft start dimming
- Last light level memory
- Maximum brightness setting
- Adjustable dimming step size
- Adjustable auto-off
- Supports 3 wire and 2 wire (without neutral) installation
- Requires FGB-002 bypass module when used with dimmable LED or CFL (sold separately)
- Dimensions: 1.67 x 1.5 x 0.8 inches (42.5 x 38.25 x 20.3 mm) (L x W x H)
- Rated 120VAC
- Recommended load: Resistive 25-125W, Resistive-capacitive 25-100VA, inductive 25-110VA
- 1 year manufacturer's warranty
Spécifications techniques
The Fibaro Micro Dimmer 2 is a universal module for controlling virtually any sort of lighting load. It can be used as a dimmer with dimmable LED, CFL, incandescent and halogen lighting. It can be used for on/off control of non-dimming CFL or fluorescent lights. The module has the ability to calibrate itself to match the load type. The Micro Dimmer 2 also supports energy monitoring when used with compatible automaton systems.
The tiny size allows the Micro Dimmer 2 to be installed behind a standard wall switch in the junction box allowing regular wall switches and decorator switches to be Zwave enabled. The Micro Dimmer 2 is Zwave plus enabled so it can be used with a Zwave or Zwave Plus enabled automation controller.
The Micro Dimmer 2 may be used in a 3 wire or 2 wire (without neutral) installation.
Note: When used with LED or CFL loads, a FGB-002 module must also be purchased and installed (sold separately).
The tiny size allows the Micro Dimmer 2 to be installed behind a standard wall switch in the junction box allowing regular wall switches and decorator switches to be Zwave enabled. The Micro Dimmer 2 is Zwave plus enabled so it can be used with a Zwave or Zwave Plus enabled automation controller.
The Micro Dimmer 2 may be used in a 3 wire or 2 wire (without neutral) installation.
Note: When used with LED or CFL loads, a FGB-002 module must also be purchased and installed (sold separately).
Fibaro FGD-212-ZW5 Zwave Universal Micro Dimmer 2 Features:
- Zwave plus and Zwave enabled (500 series chip on board)
- Supports dimming operation for dimmable LED, CFL, incandescent and halogen lighting
- Supports on/off operation for non-dimming LED and CFL and fluorescent lights
- Automatic light type detection supporting leading edge and trailing edge dimming
- Installs behind your wall switch
- Soft start dimming
- Last light level memory
- Maximum brightness setting
- Adjustable dimming step size
- Adjustable auto-off
- Supports 3 wire and 2 wire (without neutral) installation
- Requires FGB-002 bypass module when used with dimmable LED or CFL (sold separately)
- Dimensions: 1.67 x 1.5 x 0.8 inches (42.5 x 38.25 x 20.3 mm) (L x W x H)
- Rated 120VAC
- Recommended load: Resistive 25-125W, Resistive-capacitive 25-100VA, inductive 25-110VA
- 1 year manufacturer's warranty
Comparaison de produits
Garantie du produit
Garantie standard du fabricant, le cas échéant
Politique de retour
Garantie de prix
!00% nous sommes toujours en dessous du prix du marché.
Explorez les collections de marque
Nos services
-
Voir plusConcevoir et construire des espaces de travail, des salles de conférence et des salles de réunion
-
Voir plusService informatique géré, services d'assistance, serveurs et réseaux
-
Voir plusÉvaluation, acquisition et personnalisation des appareils de nouvelle génération
-
Voir plusContinuité des activités, sécurité, sauvegarde et reprise après sinistre
-
Voir plusStructure du cloud, migration, optimisation et sécurité
-
Voir plusNumérisation, conservation des données, automatisation, applications de développement
