Voltmètre industriel sans fil Monnit 0-10 V CC - Rouge, noir, cuivre, polyvinyle

The ALTA Wireless Voltage Meter measures DC voltage up to 5V or 10V on user specified intervals.

Key Features

• Measurement Range: 0 to 5 VDC or 0 to 10 VDC
• Resolution: 1 mV
• Accuracy:
• Uncalibrated: ± 2.0% of reading ± 0.002 VDC
• Calibrated: ± 0.5% of reading ± 0.002 VDC
• Configurable thresholds for critical condition monitoring

Principles of Operation

The ALTA Wireless 5 and 10 VDC Voltage Meter measures the single-ended DC voltage across its two leads based on a user-configurable time interval or Heartbeat. On every Heartbeat, the sensor converts the analog voltage signal to a digital voltage measurement. This measurement is then sent to the gateway, making the data available in iMonnit or another approved data service.

The ALTA 5 and 10 VDC Voltage Meter can be calibrated for improved accuracy. Also, remember to remove any active voltages from the measurement leads when replacing batteries or performing other maintenance.

• Wireless range of 2,000+ feet through 18+ walls
• Frequency-Hopping Spread Spectrum (FHSS)
• Best-in-class interference immunity
• Best-in-class power management for longer battery life
• Encrypt-RF ® Security (Diffie-Hellman Key Exchange + Advanced Encryption Standard (AES)-128 Cipher Block Chaining (CBC) for sensor data messages)
• Sensor logs 2000 to 4000 readings if the gateway connection is lost (non-volatile flash, persists through power cycling
• Automatic over-the-air updates to sensor firmware (future-proof)
• Free iMonnit Basic Online Wireless Sensor Monitoring and Notification System to configure sensors, view data, and send alerts via SMS text, email, and voice call

Garantie standard du fabricant, le cas échéant

Politiques

!00% nous sommes toujours en dessous du prix du marché.