À propos du produit
Tired of guesswork involved in finding electrical circuit problems? If you're in the business of installing and troubleshooting electrical circuits, opens, shorts and arc faults?
The Fault Trapper TFT100 can make your life much simpler by identifying the type of fault and identifying when it happens as well as WHERE it happens.
The Fault trapper uses a technology called Spread Spectrum Time Domain Reflectometry (SSTDR) to monitor live energized circuits and capture the time and distance to the fault, isolating intermittent or persistent opens, shorts and arc faults.
These events are stored in memory for later investigation, allowing for unattended monitoring of energized dedicated circuits to locate the fault on the line. The in-line 40 Amp module isolates the circuit breaker from the breaker panel and all other circuits.
The Fault Trapper TFT100 can make your life much simpler by identifying the type of fault and identifying when it happens as well as WHERE it happens.
The Fault trapper uses a technology called Spread Spectrum Time Domain Reflectometry (SSTDR) to monitor live energized circuits and capture the time and distance to the fault, isolating intermittent or persistent opens, shorts and arc faults.
These events are stored in memory for later investigation, allowing for unattended monitoring of energized dedicated circuits to locate the fault on the line. The in-line 40 Amp module isolates the circuit breaker from the breaker panel and all other circuits.
Platinum Tools TFT100 Fault Trapper Features:
- In-line monitoring of energized dedicated circuits up to 300 VAC and 40 amps
- Allows unattended monitoring for intermittent faults
- No Splicing - Plug in with existing wiring
- Identifies intermittent opens, shorts and arc faults
- Able to detect faults that circuit breaker may not
- Runs on in-line power in monitor mode
- Fault location reported as distance from the Fault Trapper in feet/meters
- Easy-to-use three-button operation
- Backlit LCD display for dark areas
- Back-up battery allows capture of breaker trips/unpowered display of results
- 300V CAT III, 120/240Vac, 40 amps or less, single phase
UL 61010-1:2012, CAN/CSA-C22.2 NO. 61010-1-12
NOTE: This tools is intended to be used strictly by trained and certified electrical professionals.
Spécifications techniques
Tired of guesswork involved in finding electrical circuit problems? If you're in the business of installing and troubleshooting electrical circuits, opens, shorts and arc faults?
The Fault Trapper TFT100 can make your life much simpler by identifying the type of fault and identifying when it happens as well as WHERE it happens.
The Fault trapper uses a technology called Spread Spectrum Time Domain Reflectometry (SSTDR) to monitor live energized circuits and capture the time and distance to the fault, isolating intermittent or persistent opens, shorts and arc faults.
These events are stored in memory for later investigation, allowing for unattended monitoring of energized dedicated circuits to locate the fault on the line. The in-line 40 Amp module isolates the circuit breaker from the breaker panel and all other circuits.
The Fault Trapper TFT100 can make your life much simpler by identifying the type of fault and identifying when it happens as well as WHERE it happens.
The Fault trapper uses a technology called Spread Spectrum Time Domain Reflectometry (SSTDR) to monitor live energized circuits and capture the time and distance to the fault, isolating intermittent or persistent opens, shorts and arc faults.
These events are stored in memory for later investigation, allowing for unattended monitoring of energized dedicated circuits to locate the fault on the line. The in-line 40 Amp module isolates the circuit breaker from the breaker panel and all other circuits.
Platinum Tools TFT100 Fault Trapper Features:
- In-line monitoring of energized dedicated circuits up to 300 VAC and 40 amps
- Allows unattended monitoring for intermittent faults
- No Splicing - Plug in with existing wiring
- Identifies intermittent opens, shorts and arc faults
- Able to detect faults that circuit breaker may not
- Runs on in-line power in monitor mode
- Fault location reported as distance from the Fault Trapper in feet/meters
- Easy-to-use three-button operation
- Backlit LCD display for dark areas
- Back-up battery allows capture of breaker trips/unpowered display of results
- 300V CAT III, 120/240Vac, 40 amps or less, single phase
UL 61010-1:2012, CAN/CSA-C22.2 NO. 61010-1-12
NOTE: This tools is intended to be used strictly by trained and certified electrical professionals.
Comparaison de produits
Garantie du produit
Garantie standard du fabricant, le cas échéant
Politique de retour
Garantie de prix
!00% nous sommes toujours en dessous du prix du marché.
Explorez les collections de marque
Nos services
