À propos du produit
TRENDnet's 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch, model TI-PG1284i, has eight Gigabit PoE+ ports, four Gigabit SFP slots, and a 240 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range (- 40 75 C (- 40 - 167F)) for harsh environments. L2+ management include features such as PoE port control, 802.1Q / Q-in-Q VLAN, multicast, spanning tree, link aggregation, QoS, IPv4 / IPv6 static routing, ACLs, and 802.1X which allow for network integration flexibility.
TRENDnet TI-PG1284I Features
TRENDNET TI-PG1284I Specifications
Standards- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3af
- IEEE 802.3at
- 8 x Gigabit PoE+ ports
- 4 x Gigabit SFP slots
- 1 x Console port (RJ-45)
- 6-pin removable terminal block (Primary / RPS power inputs & alarm relay output)
- DIP switch (Alarm for primary / RPS power and ports / slots failure)
- LED indicators
- Ethernet: 10 Mbps (half-duplex), 20 Mbps (full-duplex)
- Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps (full-duplex)
- Gigabit Ethernet: 2000 Mbps (full-duplex)
- SX / LX: 2000 Mbps (full-duplex)
- Switch fabric: 24 Gbps
- RAM buffer: 128 MB
- MAC address table: 16 K entries
- Jumbo frames: 10 KB
- Forwarding rate: 17.86 Mpps (64-byte packet size)
- CLI (Console, Telnet, SSH)
- HTTP / HTTPS (SSL) web based GUI
- SNMP v1, v2c, 3
- SNMP trap
- RMON groups 1, 2, 3, 9
- LLDP
- SNTP
- SMTP alert
- Syslog
- Port statistics / utilization
- Traffic monitor
- Port mirror (Ingress, Egress, Both)
- Storm control (Multicast, DLF, Broadcast)
- Modbus / TCP
- IPv6 static IP address, DHCPv6 client
- Dual Image
- Auto Provision via FTP / TFTP / HTTP Server
- Xpress Ring
- ERPS (Ethernet Ring Protection Switching) G8032v2
- SFP DDMI (Digital Diagnostic Monitoring Interface)
- MIB II RFC 1213
- Bridge MIB RFC 1493
- Ethernet Interface MIB RFC 1643
- RMON MIB RFC 1757
- STP (Spanning Tree protocol)
- RSTP (Rapid Spanning Tree protocol)
- MSTP (Multiple Spanning Tree protocol)
- Static link aggregation
- 802.3ad dynamic LACP
- Up to 6 link aggregation groups
- 802.1p Class of Service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandwidth control per port
- Queue Scheduling: Strict Priority (SP), Weighted Round Robin (WRR)
- 802.1Q tagged VLAN
- MAC-based VLAN
- Dynamic GVRP
- Protocol-based (Ethernet II, Non-LLC-SNAP, LLC-SNAP)
- Q-in-Q VLAN stacking / double VLAN (port-based, selective)
- Port isolation
- Up to 256 VLAN groups, ID range 1-4094
- IGMP snooping v1, v2, v3
- MVR
- MLD v1, v2
- IGMP filtering / querier / proxy
- Static multicast address
- Up to 256 multicast entries
- 802.1X port-based network access control RADIUS
- Local dial-in user authentication
- DHCP snooping / screening
- Loopback detection
- ARP inspection
- IP Source Guard
- Trusted host
- MAC address learning
- MAC Address
- VLAN ID
- Ethernet Type
- IP Protocol 0-255
- TCP / UDP Port 1-65535
- DSCP
- IPv4 / IPv6 static routing
- IPv4 / IPv6 proxy ARP
- IP interfaces: Up to 16
- Routing table entries: Up to 500 (IPv4: 400 / IPv6: 100)
- DHCP Relay / Option 82
- CLI & web based management
- Full power PoE+
- Wide operating temperature range
- Redundant power inputs
- Alarm relay triggered by power and ports / slots failure
- Surge / ESD protection
- L2+ management features
- PWR (Primary) terminal input: 48 57 V DC (TI-S24048 sold separately)
- RPS (Redundant) terminal input: 48 57 V DC (TI-S24048 sold separately)
- Consumption: 18 W (max.), 260 W (max.) with PoE+ fully loaded
- Input: 100-240 V AC, 50 / 60 Hz, 1.8 A 125-370 V DC
- Output: 240 Watts, 48 V, 5 A
- DIN-rail: TS-35 / 7.5 or 15
- Operating Temperature: - 25 to 70 C (- 13 to 158 F)
- PoE budget: 240 W
- Up to 15 W per port for PoE
- Up to 30 W per port for PoE+
- Mode A: Pins 1, 2 (V+) and pins 3, 6 (V-)
- PoE enable / disable per port setting, priority, scheduling, power delay, and PD alive check
- IP30 rated metal enclosure
- DIN-Rail mount
- Grounding point
- ESD (Ethernet) Protection: 8 KV DC
- Surge (Power) Protection: 6 KV DC
- 99,992 hrs @ 75 C
- 322,805 hrs @ 25 C
- - 40 to 75 C (-40 to 167 F)
- Max. 95% non-condensing
- 170 x 132 x 50 mm (6.69 x 5.2 x 1.97 in.)
- 920 g (2.03 lbs.)
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
What's Included
Spécifications techniques
TRENDnet's 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch, model TI-PG1284i, has eight Gigabit PoE+ ports, four Gigabit SFP slots, and a 240 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range (- 40 75 C (- 40 - 167F)) for harsh environments. L2+ management include features such as PoE port control, 802.1Q / Q-in-Q VLAN, multicast, spanning tree, link aggregation, QoS, IPv4 / IPv6 static routing, ACLs, and 802.1X which allow for network integration flexibility.
TRENDnet TI-PG1284I Features
TRENDNET TI-PG1284I Specifications
Standards- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3af
- IEEE 802.3at
- 8 x Gigabit PoE+ ports
- 4 x Gigabit SFP slots
- 1 x Console port (RJ-45)
- 6-pin removable terminal block (Primary / RPS power inputs & alarm relay output)
- DIP switch (Alarm for primary / RPS power and ports / slots failure)
- LED indicators
- Ethernet: 10 Mbps (half-duplex), 20 Mbps (full-duplex)
- Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps (full-duplex)
- Gigabit Ethernet: 2000 Mbps (full-duplex)
- SX / LX: 2000 Mbps (full-duplex)
- Switch fabric: 24 Gbps
- RAM buffer: 128 MB
- MAC address table: 16 K entries
- Jumbo frames: 10 KB
- Forwarding rate: 17.86 Mpps (64-byte packet size)
- CLI (Console, Telnet, SSH)
- HTTP / HTTPS (SSL) web based GUI
- SNMP v1, v2c, 3
- SNMP trap
- RMON groups 1, 2, 3, 9
- LLDP
- SNTP
- SMTP alert
- Syslog
- Port statistics / utilization
- Traffic monitor
- Port mirror (Ingress, Egress, Both)
- Storm control (Multicast, DLF, Broadcast)
- Modbus / TCP
- IPv6 static IP address, DHCPv6 client
- Dual Image
- Auto Provision via FTP / TFTP / HTTP Server
- Xpress Ring
- ERPS (Ethernet Ring Protection Switching) G8032v2
- SFP DDMI (Digital Diagnostic Monitoring Interface)
- MIB II RFC 1213
- Bridge MIB RFC 1493
- Ethernet Interface MIB RFC 1643
- RMON MIB RFC 1757
- STP (Spanning Tree protocol)
- RSTP (Rapid Spanning Tree protocol)
- MSTP (Multiple Spanning Tree protocol)
- Static link aggregation
- 802.3ad dynamic LACP
- Up to 6 link aggregation groups
- 802.1p Class of Service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandwidth control per port
- Queue Scheduling: Strict Priority (SP), Weighted Round Robin (WRR)
- 802.1Q tagged VLAN
- MAC-based VLAN
- Dynamic GVRP
- Protocol-based (Ethernet II, Non-LLC-SNAP, LLC-SNAP)
- Q-in-Q VLAN stacking / double VLAN (port-based, selective)
- Port isolation
- Up to 256 VLAN groups, ID range 1-4094
- IGMP snooping v1, v2, v3
- MVR
- MLD v1, v2
- IGMP filtering / querier / proxy
- Static multicast address
- Up to 256 multicast entries
- 802.1X port-based network access control RADIUS
- Local dial-in user authentication
- DHCP snooping / screening
- Loopback detection
- ARP inspection
- IP Source Guard
- Trusted host
- MAC address learning
- MAC Address
- VLAN ID
- Ethernet Type
- IP Protocol 0-255
- TCP / UDP Port 1-65535
- DSCP
- IPv4 / IPv6 static routing
- IPv4 / IPv6 proxy ARP
- IP interfaces: Up to 16
- Routing table entries: Up to 500 (IPv4: 400 / IPv6: 100)
- DHCP Relay / Option 82
- CLI & web based management
- Full power PoE+
- Wide operating temperature range
- Redundant power inputs
- Alarm relay triggered by power and ports / slots failure
- Surge / ESD protection
- L2+ management features
- PWR (Primary) terminal input: 48 57 V DC (TI-S24048 sold separately)
- RPS (Redundant) terminal input: 48 57 V DC (TI-S24048 sold separately)
- Consumption: 18 W (max.), 260 W (max.) with PoE+ fully loaded
- Input: 100-240 V AC, 50 / 60 Hz, 1.8 A 125-370 V DC
- Output: 240 Watts, 48 V, 5 A
- DIN-rail: TS-35 / 7.5 or 15
- Operating Temperature: - 25 to 70 C (- 13 to 158 F)
- PoE budget: 240 W
- Up to 15 W per port for PoE
- Up to 30 W per port for PoE+
- Mode A: Pins 1, 2 (V+) and pins 3, 6 (V-)
- PoE enable / disable per port setting, priority, scheduling, power delay, and PD alive check
- IP30 rated metal enclosure
- DIN-Rail mount
- Grounding point
- ESD (Ethernet) Protection: 8 KV DC
- Surge (Power) Protection: 6 KV DC
- 99,992 hrs @ 75 C
- 322,805 hrs @ 25 C
- - 40 to 75 C (-40 to 167 F)
- Max. 95% non-condensing
- 170 x 132 x 50 mm (6.69 x 5.2 x 1.97 in.)
- 920 g (2.03 lbs.)
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
What's Included
Comparaison de produits
Garantie du produit
Garantie standard du fabricant, le cas échéant
Politique de retour
Garantie de prix
!00% nous sommes toujours en dessous du prix du marché.
Explorez les collections de marque
Nos services
