À propos du produit
The Aeotec Water Sensor 7 Pro is a 3-in-1 Gen 7 ZWave 700 series sensor that can protect your home or property from costly damage. The Water Sensor 7 Pro detects water leaks or flooding with its attached wired probe. It also has built-in temperature and humidity monitoring that reports the status back to your ZWave enabled smart hub.
The water probe's stainless steel tip can detect as little as .5mm / 0.02 inches of water on a surface to quickly detect small water leaks.
When used with a compatible hub, you can receive email or texts alerts or take proactive measures like automatically turning off the water supply using a ZWave water valve or turning on a sump pump with a Zwave switch.
The ZWA019 Water Sensor 7 Pro is compatible with a number of smart home hubs and software, including SmartThings, Fibaro Home Centre, Home Assistant, HomeSeer/Hometroller, Hubitat, Ezlo.
For hubs that support SmartStart, enrollment is as simple as scanning the QR code.
Aeotec ZWA019 ZWave Water Sensor Pro 7
- Detects water presence, flooding
- Detects water absence
- Detects temperature and humidity
- Tamper sensor
- Water probe attached with 1.5m / 4.9 ft wire
- Gen 7 ZWave 700 Series
- Backwards compatible to ZWave Plus 500 series
- ZWave Smart Start enabled
- Supports S2 security
- Operating Temp 32°F to 113°F / 0°C to 45°C
- Measuring temp: -10 to 65°C (+- 1°C) / 14 to 149°F (+- 1.8°F)
- Indoor use only
- IP20 rated
- Battery type 1/2 AA ER14250 3.6V
- Battery life: up to 3 years
- Dimensions: 70 x 13 x 20 mm
ZWA019 Includes:
- Water Sensor 7 Pro
- Attached probe
- Double-sided tape
- Mounting screws
Additional Information:
Spécifications techniques
The Aeotec Water Sensor 7 Pro is a 3-in-1 Gen 7 ZWave 700 series sensor that can protect your home or property from costly damage. The Water Sensor 7 Pro detects water leaks or flooding with its attached wired probe. It also has built-in temperature and humidity monitoring that reports the status back to your ZWave enabled smart hub.
The water probe's stainless steel tip can detect as little as .5mm / 0.02 inches of water on a surface to quickly detect small water leaks.
When used with a compatible hub, you can receive email or texts alerts or take proactive measures like automatically turning off the water supply using a ZWave water valve or turning on a sump pump with a Zwave switch.
The ZWA019 Water Sensor 7 Pro is compatible with a number of smart home hubs and software, including SmartThings, Fibaro Home Centre, Home Assistant, HomeSeer/Hometroller, Hubitat, Ezlo.
For hubs that support SmartStart, enrollment is as simple as scanning the QR code.
Aeotec ZWA019 ZWave Water Sensor Pro 7
- Detects water presence, flooding
- Detects water absence
- Detects temperature and humidity
- Tamper sensor
- Water probe attached with 1.5m / 4.9 ft wire
- Gen 7 ZWave 700 Series
- Backwards compatible to ZWave Plus 500 series
- ZWave Smart Start enabled
- Supports S2 security
- Operating Temp 32°F to 113°F / 0°C to 45°C
- Measuring temp: -10 to 65°C (+- 1°C) / 14 to 149°F (+- 1.8°F)
- Indoor use only
- IP20 rated
- Battery type 1/2 AA ER14250 3.6V
- Battery life: up to 3 years
- Dimensions: 70 x 13 x 20 mm
ZWA019 Includes:
- Water Sensor 7 Pro
- Attached probe
- Double-sided tape
- Mounting screws
Additional Information:
Comparaison de produits
Garantie du produit
Garantie standard du fabricant, le cas échéant
Politique de retour
Garantie de prix
!00% nous sommes toujours en dessous du prix du marché.
Explorez les collections de marque
Nos services
-
Voir plusConcevoir et construire des espaces de travail, des salles de conférence et des salles de réunion
-
Voir plusService informatique géré, services d'assistance, serveurs et réseaux
-
Voir plusÉvaluation, acquisition et personnalisation des appareils de nouvelle génération
-
Voir plusContinuité des activités, sécurité, sauvegarde et reprise après sinistre
-
Voir plusStructure du cloud, migration, optimisation et sécurité
-
Voir plusNumérisation, conservation des données, automatisation, applications de développement
