Ecolink ZWave Plus Motorized No Wire Double Gang Rocker Light Switch (DDLS2-ZWAVE5)

The Ecolink ZWave Motorized Decora style double gang switch easily automates two side by side double gang existing wall switches without having to touch the wires.  Just remove the wall plate and replace it with this device pair.

This device works with SmartThings, VeraEdge, VeraPlus, VeraSecure, SmartThings, HomeSeer/Hometroller.  Alarm.com and SecureNet.

It's a great solution for wall switch locations without a neutral wire where most ZWave switches won't work.

The DDLS2-ZWAVE5 installs in minutes.  Just remove the wall cover plate, and affix it to the old switches with four screws, without having to modify anything else.  Once installed, it provides ZWave automated control while maintaining manual local control. 

This switch supports ZWave Plus as well as standard Zwave and works with most brands of ZWave hubs.  It can also be used with compatible automated alarm systems. 

• Installs in minutes
• No wiring or switch modification needed
• No electrician needed
• No neutral wire required
• No concerns about light or bulb compatibility
• Adds ZWave control
• Can still be switched manually at the switch

Note: This is for double gang switches only - meaning two wall switches side by side.  It will not work with triple switches or more in the same wall plate. It is a motorized device so when activated by Zwave you will hear a motor buzz momentarily.  Provides up to 2 years of use on 2 x AA lithium batteries per switch..  On/off control only, no dimming.

The Ecolink ZWave Motorized Decora style double gang switch easily automates two side by side double gang existing wall switches without having to touch the wires.  Just remove the wall plate and replace it with this device pair.

This device works with SmartThings, VeraEdge, VeraPlus, VeraSecure, SmartThings, HomeSeer/Hometroller.  Alarm.com and SecureNet.

It's a great solution for wall switch locations without a neutral wire where most ZWave switches won't work.

The DDLS2-ZWAVE5 installs in minutes.  Just remove the wall cover plate, and affix it to the old switches with four screws, without having to modify anything else.  Once installed, it provides ZWave automated control while maintaining manual local control. 

This switch supports ZWave Plus as well as standard Zwave and works with most brands of ZWave hubs.  It can also be used with compatible automated alarm systems. 

• Installs in minutes
• No wiring or switch modification needed
• No electrician needed
• No neutral wire required
• No concerns about light or bulb compatibility
• Adds ZWave control
• Can still be switched manually at the switch

Note: This is for double gang switches only - meaning two wall switches side by side.  It will not work with triple switches or more in the same wall plate. It is a motorized device so when activated by Zwave you will hear a motor buzz momentarily.  Provides up to 2 years of use on 2 x AA lithium batteries per switch..  On/off control only, no dimming.