Share
Thermostats & Heaters
Expected delivery 3 to 7 business days (exceptions applied)
Stelpro
StelPro Dragon Ceiling Fan forced Heater, 3000W 240V, White *Special Order (DRI0321W)
StelPro Dragon Ceiling Fan forced Heater, 3000W 240V, White *Special Order (DRI0321W)
StelPro Dragon Ceiling Fan forced Heater, 3000W 240V, White *Special Order (DRI0321W)
VPN:DRI0321W SKU:AT550119 UPC:626296002889
Couldn't load pickup availability
Volume discount available - Ask for quote..
View full details

Recently Viewed
StelPro Dragon Ceiling Fan forced Heater, 3000W 240V, White *Special Order (DRI0321W)
Product information summary

About the product
The Dragon's unique feature is its ability to recycle leftover warm air that has gathered at the ceiling and mix it with the chilly air below. Depending on the model, the Dragon can output between 2000 and 10,000 W and has voltage ranges of 208 to 600 V. This device, which is hung at least eight feet above the floor, can be surface mounted or recessed in the ceiling. Building corridors, garages, workshops, entryways and stairwells are all excellent uses for the Dragon.
Dragon Ceiling Fan Heater Features:
- MANUFACTURING
- 20-gauge steel cabinet and 14-gauge steel grille
- Quiet helicoidal fan
- Thermal protection with automatic reset
- Closed and permanently lubricated motor
- Pilot light indicates when power is on
- CONTROL
- Wall thermostat (not included) – the use of an electronic thermostat is strongly recommended (up to 4000 W)
- Fan-only mode for continuous air circulation, controlled by built-in selection switch
- Disconnect switch option available (ADRR models only)
- Fan-only mode available for use with wall mounted switch (optional OFS model, wall switch not provided)
- Heating mode, confirmed by pilot light when heating is on
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided)
- INSTALLATION
- Ceiling recessed in a T-bar (ADRR model)
- Ceiling surface mounted with bracket to support unit during wiring (ADRI and ADRII models) (included)
- Install at a minimum distance from adjacent or surrounding walls: 12 in. (ADRR or ADRI models); 24 in. (ADRII models)
- Mounting heights: 8 ft. (2 kW or 3 kW units); 10 ft. (4 kW or 5 kW units); 12 ft. (7.5 kW or 10 kW units)
- COLORS
- Standard: white, soft white
- ORORA (optional): refer to www.stelpro.com/en-US/orora
- FINISH: Epoxy-polyester powdercoat
- ELEMENT: Nichrome element produces instant heat
- WARRANTY: Three Years
Dragon Ceiling Fan Heater Specifications:
- Power Watts: 3000
- Voltage Volts: 240
- Air Flow Cfm: 250
- Weight: 7.2 (16)
- Color: Whte
Technical Specifications
The Dragon's unique feature is its ability to recycle leftover warm air that has gathered at the ceiling and mix it with the chilly air below. Depending on the model, the Dragon can output between 2000 and 10,000 W and has voltage ranges of 208 to 600 V. This device, which is hung at least eight feet above the floor, can be surface mounted or recessed in the ceiling. Building corridors, garages, workshops, entryways and stairwells are all excellent uses for the Dragon.
Dragon Ceiling Fan Heater Features:
- MANUFACTURING
- 20-gauge steel cabinet and 14-gauge steel grille
- Quiet helicoidal fan
- Thermal protection with automatic reset
- Closed and permanently lubricated motor
- Pilot light indicates when power is on
- CONTROL
- Wall thermostat (not included) – the use of an electronic thermostat is strongly recommended (up to 4000 W)
- Fan-only mode for continuous air circulation, controlled by built-in selection switch
- Disconnect switch option available (ADRR models only)
- Fan-only mode available for use with wall mounted switch (optional OFS model, wall switch not provided)
- Heating mode, confirmed by pilot light when heating is on
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided)
- INSTALLATION
- Ceiling recessed in a T-bar (ADRR model)
- Ceiling surface mounted with bracket to support unit during wiring (ADRI and ADRII models) (included)
- Install at a minimum distance from adjacent or surrounding walls: 12 in. (ADRR or ADRI models); 24 in. (ADRII models)
- Mounting heights: 8 ft. (2 kW or 3 kW units); 10 ft. (4 kW or 5 kW units); 12 ft. (7.5 kW or 10 kW units)
- COLORS
- Standard: white, soft white
- ORORA (optional): refer to www.stelpro.com/en-US/orora
- FINISH: Epoxy-polyester powdercoat
- ELEMENT: Nichrome element produces instant heat
- WARRANTY: Three Years
Dragon Ceiling Fan Heater Specifications:
- Power Watts: 3000
- Voltage Volts: 240
- Air Flow Cfm: 250
- Weight: 7.2 (16)
- Color: Whte
Product compare
Product warranty
Standard manufacturer warranty as applicable
Return policy
15 days return in original condition.
Price guarantee
!00% we are always lower than market price.
Explore branded collections
Our services

Partner with us

High business ethics and integrity

Consistence and focused performance

Shared vision and shared success

High confidentiality and security
-
See more
Design and build workplace, conference rooms & boardroom
-
See more
Managed IT service, help desks, servers, & networking
-
See more
Next generation devices assess, procure, customization
-
See more
Business continuity, security, backup & disaster recovery
-
See more
Cloud structure, migration, optimization and security
-
See more
Digitization, data retention, automation, Dev apps