Share
Security & Alarm Systems
Expected delivery 3 to 7 business days (exceptions applied)
Elk Products
Elk Wireless Water Sensor with 6 Foot Probe for Qolsys 319.5 MHz (ELK-319WA)
Elk Wireless Water Sensor with 6 Foot Probe for Qolsys 319.5 MHz (ELK-319WA)
Elk Wireless Water Sensor with 6 Foot Probe for Qolsys 319.5 MHz (ELK-319WA)
VPN:ELK-319WA SKU:AT880097 UPC:762158190100
Couldn't load pickup availability
Volume discount available - Ask for quote..
View full details
Recently Viewed
Elk Wireless Water Sensor with 6 Foot Probe for Qolsys 319.5 MHz (ELK-319WA)
Product information summary

About the product
The ELK-319WA is a Supervised, Wireless Water Sensor designed so that the transmitter mounts on a wall or other flat vertical surface, and the remote probe is placed in the location where water leakage is most probable.
Moisture forming a bridge between the two metallic contacts on a remote probe is all that is needed for the unit to signal an alarm condition. The output on the ELK-319WA will remain in alarm state until the moisture bridge is broken. As sensitive as the water sensor is, it will not alarm due to high humidity or condensation. The ELK-319WA is ideal for use in homes, offices, computer rooms, warehouses, etc.
Compatible with E27 Alarm Engine, M1 Controls, and other systems that support 319.5 MHz wireless devices.
ELK-319WA Water Sensor Features and Benefits:
- Water detection when liquid makes contact with the probe
- Contacts above floor level to prevent false floor condensation detection
- Checks for water constantly, requires two positive checks for a valid alarm
- Compatible with ELK’s E27 Alarm Engine and M1 Controls, as well as other system utilizing the 319.5 MHz frequency
ELK-319WA Water Sensor Specifications:
- RF frequency: 319.5 MHz
- Compatibility: ELK E27 and M1 Receivers/Panels & other panels that operate on the 319.5MHz Freq.
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Code Outputs: Tamper, Tamper Restore, Alarm, Alarm Restore, Low Battery
- Operating Temp Range: 32° to 122°F (-40° to 60° C)
- Dimensions Transmitter: 2.71” H x .95” W x .56” D, Probe: .7” W x 1.77” L x .38” D
- Cable Length 72”
Note: The ELK-319WA water sensor is not a self- contained warning sensor device. For proper operation, it must be used in conjunction with a compatible learn-mode 319.5 MHz alarm control panel. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
Technical Specifications
The ELK-319WA is a Supervised, Wireless Water Sensor designed so that the transmitter mounts on a wall or other flat vertical surface, and the remote probe is placed in the location where water leakage is most probable.
Moisture forming a bridge between the two metallic contacts on a remote probe is all that is needed for the unit to signal an alarm condition. The output on the ELK-319WA will remain in alarm state until the moisture bridge is broken. As sensitive as the water sensor is, it will not alarm due to high humidity or condensation. The ELK-319WA is ideal for use in homes, offices, computer rooms, warehouses, etc.
Compatible with E27 Alarm Engine, M1 Controls, and other systems that support 319.5 MHz wireless devices.
ELK-319WA Water Sensor Features and Benefits:
- Water detection when liquid makes contact with the probe
- Contacts above floor level to prevent false floor condensation detection
- Checks for water constantly, requires two positive checks for a valid alarm
- Compatible with ELK’s E27 Alarm Engine and M1 Controls, as well as other system utilizing the 319.5 MHz frequency
ELK-319WA Water Sensor Specifications:
- RF frequency: 319.5 MHz
- Compatibility: ELK E27 and M1 Receivers/Panels & other panels that operate on the 319.5MHz Freq.
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Code Outputs: Tamper, Tamper Restore, Alarm, Alarm Restore, Low Battery
- Operating Temp Range: 32° to 122°F (-40° to 60° C)
- Dimensions Transmitter: 2.71” H x .95” W x .56” D, Probe: .7” W x 1.77” L x .38” D
- Cable Length 72”
Note: The ELK-319WA water sensor is not a self- contained warning sensor device. For proper operation, it must be used in conjunction with a compatible learn-mode 319.5 MHz alarm control panel. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
Product compare
Product warranty
Standard manufacturer warranty as applicable
Return policy
15 days return in original condition.
Price guarantee
!00% we are always lower than market price.
Explore branded collections
Our services

Partner with us

High business ethics and integrity

Consistence and focused performance

Shared vision and shared success

High confidentiality and security
-
See more
Design and build workplace, conference rooms & boardroom
-
See more
Managed IT service, help desks, servers, & networking
-
See more
Next generation devices assess, procure, customization
-
See more
Business continuity, security, backup & disaster recovery
-
See more
Cloud structure, migration, optimization and security
-
See more
Digitization, data retention, automation, Dev apps