Honeywell Recessed Glass Break Detector for Ceiling or Wall Mounting (FG-1625RFM)

The Honeywell FG-1625RFM glass break detector can be wall or ceiling flush mounted so it is incredible discrete.  It features fast response time while maintaining excellent false alarm immunity with a sensitivity adjustment that allows it to be field adjusted to compensate for the acoustics of the room.

• FlexCore™ Signal Processor
  The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard® performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
• Easy Installation and Setup
  Honeywell’s patented technology allows remote activation of Test Mode (with simulator). The FG1625RFM recesses in a 1.0"" (26mm) diameter hole through a false ceiling or sheetrock. A hand-clap feature verifies that the detector is functioning.
• Selectable Sensitivity
  Two DIP switches on the FG1625RFM make it easy to set the sensitivity to match the acoustics of the room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG701 Glassbreak Simulator.
• Mount the Detector Anywhere
  Flush mounts in any wall, or in the ceiling, with no minimum range and a maximum range of 25' (7.6 m) to the glass.
• Covers All Glass Types
  The FG1625RFM works on all glass types, including plate, tempered, laminated, wired, filmcoated, and sealed insulating glass.
• Multiple Domain Signal Analysis
  The FG1625RFM performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.
• Patented Remote Test Mode
  The Patented Remote Test Mode can enable or disable the indicator LEDs using the FG701 Glassbreak Simulator. The unit automatically resets from Test Mode in five minutes.
• Mounting Locations
  The FG1625RFM can be flush mounted in the ceiling, opposite wall, adjoining wall, or the same wall as the glass through a 1"" diameter hole.

The Honeywell FG-1625RFM glass break detector can be wall or ceiling flush mounted so it is incredible discrete.  It features fast response time while maintaining excellent false alarm immunity with a sensitivity adjustment that allows it to be field adjusted to compensate for the acoustics of the room.

• FlexCore™ Signal Processor
  The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard® performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
• Easy Installation and Setup
  Honeywell’s patented technology allows remote activation of Test Mode (with simulator). The FG1625RFM recesses in a 1.0"" (26mm) diameter hole through a false ceiling or sheetrock. A hand-clap feature verifies that the detector is functioning.
• Selectable Sensitivity
  Two DIP switches on the FG1625RFM make it easy to set the sensitivity to match the acoustics of the room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG701 Glassbreak Simulator.
• Mount the Detector Anywhere
  Flush mounts in any wall, or in the ceiling, with no minimum range and a maximum range of 25' (7.6 m) to the glass.
• Covers All Glass Types
  The FG1625RFM works on all glass types, including plate, tempered, laminated, wired, filmcoated, and sealed insulating glass.
• Multiple Domain Signal Analysis
  The FG1625RFM performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.
• Patented Remote Test Mode
  The Patented Remote Test Mode can enable or disable the indicator LEDs using the FG701 Glassbreak Simulator. The unit automatically resets from Test Mode in five minutes.
• Mounting Locations
  The FG1625RFM can be flush mounted in the ceiling, opposite wall, adjoining wall, or the same wall as the glass through a 1"" diameter hole.