Tripp Lite by Eaton SmartPro SMART700HGL 700VA Tower UPS - Tower, Wall

Tripp Lite's SMART700HGL medical-grade UPS system provides dependable lithium iron phosphate (LiFePO4) battery backup, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. It's fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA/450W capacity provides up to 42 minutes of runtime for a half load and 18 minutes for a full load. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output without drawing battery power. The SMART700HGL's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and a hospital-grade NEMA 5-15P-HG plug with a six-foot cord for flexibility in placement. All four outlets provide both battery backup and 940 joules of surge protection.

The SMART700HGL also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure

Provides Ideal UPS Backup in Healthcare Facilities

• Compliant with UL 60601-1 standards for use in patient-care vicinities when plugged into a hospital-grade outlet
• Built-in isolation transformer with Faraday shield offers full isolation and reduces cumulative leakage current of connected equipment to less than 100 µA
• Hospital-grade NEMA 5-15P-HG plug with 6 ft. cord provides flexibility in placement, so healthcare workers can focus on treating the patient

Battery Backup and Full Surge Protection

• Supports half load for 42 min. and full load for 18 min. with standard LiFePO4 internal battery
• Hospital-grade NEMA 5-15R-HG outlets provide 940 joules of surge protection
• EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference
• Resistant to electrostatic discharge
• 10,000-cycle LiFePO4 battery

LEDs and Audible Alarms Keep You Aware of Power Status

• Indicator lights monitor when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning
• Audible alarms alert you to power failure, overload and low battery conditions
• Mute/quiet mode ensures "alarm fatigue" compliance

Saves Your Files, Even When You're Away

• Works with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended system shutdown and files saves during prolonged power failures
• Connects to your computer via DB9 or USB port

More from the Manufacturer

• Experience higher efficiency with lower energy cost
• 700 VA load capacity - work without any interruption during power outages
• 450 W load capacity - backup power for your valuable electronics
• Prevent critical data loss by staying powered during a blackout with up to 450 W load capacity
• 700 VA load capacity provides sufficient backup during power failures
• Keep your sensitive devices powered with a backup of up to 18 minute at full load
• Up to 18 minute runtime on full load to preserve critical data from power shortage interruptions