TRENDnet Industrial 10G SFP+ Media Converter - 1 x Network (RJ-45) - 1

TRENDnet's Industrial 10G SFP+ Media Converter, model TI-F711SFP, is a reliable IP50-rated 10G SFP+ to 10G Ethernet media converter with hardened components rated for extreme industrial environments. Set 100Mbps to 10G Ethernet throughput speeds, toggle energy efficiency, and Link Fault Pass Through (LFPT) using the front panel DIP switches. This industrial media converter features 9 - 60V DC power input with overload current protection, and an alarm relay in case of power failure. (Power supply sold separately: TI-M6024 and 48VDC3000).

Industrial Applications

Networks devices for manufacturing, general industrial, warehousing, surveillance, and corporate applications.

Fault Tolerance

Features redundant 48V and 9 - 60V DC power inputs from external power sources, and an output alarm relay to indicate an input power failure.

Industrial Hardened Design

Rugged IP50-rated housing with a high degree of vibration and shock resistance, and an operating temperature range of -40° - 75° C (-40° - 167° F).

FEATURES | 10G Port

One 10G Ethernet port for highspeed devices

Link Fault Pass Through

Easily enable the LFPT (Link Fault Pass Through) feature using the front panel DIP switch to identify a link fault to the remote LFPT enabled media converter

Dust Protected

This industrial media converter is IP50 rated for ingress dust protection

Fault Tolerance

Features an output alarm relay to indicate an input power failure

Grounding Point

Features a grounding point to protect equipment from external electrical surges

10G SFP+ Port

One 10G SFP+ port for long distance applications

Surge Protection

Provides up to 6kV RJ45 Ethernet surge protection

Extreme Temperature Range

An extreme operating temperature range of -40° - 75° C (-40° - 167°F) allows for installations in industrial environments with intense hot or cold conditions

Shock and Vibration Resistant

Rated for shock (EN 60068-2-27), freefall (EN 60068-2-31), and vibration (EN 60068-2-6)

DIP Switches

• 1: LFPT (Link Fault Pass Through) on/off (default ON)
• 2: EEE (Energy Efficient Ethernet) on/off (default OFF)

Electro Magnetic Compliance

Complies with industrial EMS certifications ESD (IEC 61000-4-2): Contact: 6kV, Air: 8kV; EFT (IEC 61000-4-4): Power: 2kV, Signal: 1kV; Surge (IEC 61000-4-5): Power: 2kV, Signal: 2kV

DIN-Rail / Wall Mounts

The rugged media converter includes DIN-Rail mount and wall mount hardware

• Connect different types of media within a network with this single port
• With 10GBase-T technology get up to 10Gbps data transfer rate over supported network cable
• Tuck the device out of the way with its Wall Mounting feature
• The DIN Rail Mountable provides convenient installation
• With Twisted Pair cable, get the desired data transfer rate up to a required distance