Share
Network Equipment
Expected delivery 3 to 7 business days (exceptions applied)
Trendnet
TRENDnet 28-Port Layer 2 Managed SFP Switch with 10G SFP+ Ports (TL2-F70284)
TRENDnet 28-Port Layer 2 Managed SFP Switch with 10G SFP+ Ports (TL2-F70284)
TRENDnet 28-Port Layer 2 Managed SFP Switch with 10G SFP+ Ports (TL2-F70284)
VPN:TL2-F70284 SKU:AT600835
Couldn't load pickup availability
Volume discount available - Ask for quote..
View full details

Recently Viewed
TRENDnet 28-Port Layer 2 Managed SFP Switch with 10G SFP+ Ports (TL2-F70284)
Product information summary

About the product
The TRENDnet 28-Port L2 Managed Rackmount SFP Switch with 10G SFP+ Ports is a gigabit SFP switch with 24x gigabit SFP ports with speeds up to 100Mbps/1Gbps, and 4x 10G SFP+ ports with speeds up to 1Gbps/10Gbps. With Layer 2 management support, web-based and CLI management for network optimization and management, and features like VLAN, GVRP and Voice VLAN support, inter-VLAN routing, IPv4/IPv6 static routing, and a total 128Gbps switching capacity, the TRENDnet 28-Port L2 Managed SFP Switch is ideal for managing RJ-45 and fiber SFP module-based networks. With included rackmount kit and smart fans for ultra-quiet operation, the TL2-F70284 is an low-footprint, robust solution for fiber networking installations.
TL2-F70284 Specs and Features:
- Standards: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1X, IEEE 802.1v, IEEE 802.1ab, IEEE 802.3u, IEEE 802.3x,IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3z
- Device Interface:
- 24 x Gigabit SFP ports (100Mbps / 1Gbps)
- 4 x 10G SFP+ ports (1Gbps / 10Gbps)
- 1 x RJ-45 console port (out-of-band)
- LED indicators
- Reset button
- Data Transfer Rate
- Fast Ethernet SFP: 200Mbps (full duplex)
- Gigabit SFP: 2000Mbps (full duplex)
- 10G SFP+: 20Gbps (full duplex)
- Performance:
- Switching capacity: 128Gbps
- RAM buffer: 2MB
- MAC address table: 32K entries
- Jumbo frames: 12KB
- Forwarding mode: store and forward
- Forwarding rate: 95.2Mpps (64-byte packet size)
- Management
- CLI (Console / Telnet / SSH)
- GUI (HTTP / HTTPS)
- IPv4/IPv6
- DNS
- TFTP/HTTP firmware upgrade
- TFTP/HTTP backup and restore configuration
- SNMP v1, v2c, v3
- SNMP trap
- RMON groups 1/2/3/9
- LLDP
- ICMPv4/ICMPv6
- Trace Route IPv4/IPv6
- Simple Network time protocol (SNTP)
- Dual image (Active/Backup)
- SNTP
- System Log (Local/Download/Remote Syslog)
- MAC entries (Static/Dynamic)
- ARP entries (Static/Dynamic)
- IPv6 neighbor discovery entries (Static/Dynamic)
- Port mirror (One to one, many to one)
- Port statistics counter
- Loopback detection
- CPU/Memory Utilization
- Real-time port statistics
- Ping watchdog
- DDM (Digital Diagnostic Monitoring)
- MIB
- RMON MIB RFC 1757
- MIB II RFC 1213
- Ethernet Interface MIB RFC 1643
- Bridge MIB RFC 1493
- RFC1215 Generic Trap
- Spanning Tree
- Spanning tree protocol (STP)
- Rapid spanning tree protocol (RSTP)
- Multiple spanning tree protocol (MSTP)
- Link Aggregation
- Static link aggregation
- Dynamic LACP (Up to 8 groups)
- Quality of Service (QoS)
- Class of service (CoS)
- Differentiated Services Code Point (DSCP)
- Bandwidth control per port/rate limiting
- Queue scheduling: strict priority (SP), weighted round robin (WRR)
- VLAN
- 802.1Q tagged VLAN
- GVRP (GARP VLAN Registration Protocol)
- Up to 256 VLAN groups, ID range 1-4094
- Protocol VLAN
- MAC VLAN
- Private VLAN
- L3 Features
- IPv4 / IPv6 static routing
- IPv4 interfaces: Up to 15
- IPv6 interfaces: Up to 15
- Routing table entries: IPv4: 32 max. / IPv6: 32 max.
- Default route entries: 1 (IPv4 / IPv6)
- ARP table (up to 512 entries)
- Inter-VLAN routing
- Multicast
- IGMP snooping v1, v2, v3
- MLD Snooping v1, v2
- IGMP/MLD fast leave and querier
- IGMP/MLD dynamic router port, and report suppression
- Multicast filtering
- Up to 256 multicast groups
- Access Control
- 802.1X authentication (Local, RADIUS IPv4/IPv6, TACACS+ IPv4/IPv6)
- 802.1X RADIUS/Guest VLAN assignment, MAC-based authentication
- DHCP snooping/binding
- Dynamic ARP inspection
- Port Security/MAC address learning restriction (Up to 256 entries per port)
- Denial of Service (DoS)
- Power
- Input: 100 – 240V AC, 50/60 Hz
- Max. consumption: 38.4W
- 3x Smart Fan Noise Level: 52.9 dBa (max.)
- Operating Temperature: 0° – 50° C (32° – 122° F)
- Dimensions: 440 x 270 x 44mm (17.3 x 10.63 x 1.73 in.)
- Rack mountable 1U height
- Weight: 3.82kg (8.42 lbs.)
- Certifications: CE, FCC, ETL
- Package Includes:
- 1x TEG-MGBS20
- Quick Installation Guide
- Lifetime Manufacturer’s Warranty
Technical Specifications
The TRENDnet 28-Port L2 Managed Rackmount SFP Switch with 10G SFP+ Ports is a gigabit SFP switch with 24x gigabit SFP ports with speeds up to 100Mbps/1Gbps, and 4x 10G SFP+ ports with speeds up to 1Gbps/10Gbps. With Layer 2 management support, web-based and CLI management for network optimization and management, and features like VLAN, GVRP and Voice VLAN support, inter-VLAN routing, IPv4/IPv6 static routing, and a total 128Gbps switching capacity, the TRENDnet 28-Port L2 Managed SFP Switch is ideal for managing RJ-45 and fiber SFP module-based networks. With included rackmount kit and smart fans for ultra-quiet operation, the TL2-F70284 is an low-footprint, robust solution for fiber networking installations.
TL2-F70284 Specs and Features:
- Standards: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1X, IEEE 802.1v, IEEE 802.1ab, IEEE 802.3u, IEEE 802.3x,IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3z
- Device Interface:
- 24 x Gigabit SFP ports (100Mbps / 1Gbps)
- 4 x 10G SFP+ ports (1Gbps / 10Gbps)
- 1 x RJ-45 console port (out-of-band)
- LED indicators
- Reset button
- Data Transfer Rate
- Fast Ethernet SFP: 200Mbps (full duplex)
- Gigabit SFP: 2000Mbps (full duplex)
- 10G SFP+: 20Gbps (full duplex)
- Performance:
- Switching capacity: 128Gbps
- RAM buffer: 2MB
- MAC address table: 32K entries
- Jumbo frames: 12KB
- Forwarding mode: store and forward
- Forwarding rate: 95.2Mpps (64-byte packet size)
- Management
- CLI (Console / Telnet / SSH)
- GUI (HTTP / HTTPS)
- IPv4/IPv6
- DNS
- TFTP/HTTP firmware upgrade
- TFTP/HTTP backup and restore configuration
- SNMP v1, v2c, v3
- SNMP trap
- RMON groups 1/2/3/9
- LLDP
- ICMPv4/ICMPv6
- Trace Route IPv4/IPv6
- Simple Network time protocol (SNTP)
- Dual image (Active/Backup)
- SNTP
- System Log (Local/Download/Remote Syslog)
- MAC entries (Static/Dynamic)
- ARP entries (Static/Dynamic)
- IPv6 neighbor discovery entries (Static/Dynamic)
- Port mirror (One to one, many to one)
- Port statistics counter
- Loopback detection
- CPU/Memory Utilization
- Real-time port statistics
- Ping watchdog
- DDM (Digital Diagnostic Monitoring)
- MIB
- RMON MIB RFC 1757
- MIB II RFC 1213
- Ethernet Interface MIB RFC 1643
- Bridge MIB RFC 1493
- RFC1215 Generic Trap
- Spanning Tree
- Spanning tree protocol (STP)
- Rapid spanning tree protocol (RSTP)
- Multiple spanning tree protocol (MSTP)
- Link Aggregation
- Static link aggregation
- Dynamic LACP (Up to 8 groups)
- Quality of Service (QoS)
- Class of service (CoS)
- Differentiated Services Code Point (DSCP)
- Bandwidth control per port/rate limiting
- Queue scheduling: strict priority (SP), weighted round robin (WRR)
- VLAN
- 802.1Q tagged VLAN
- GVRP (GARP VLAN Registration Protocol)
- Up to 256 VLAN groups, ID range 1-4094
- Protocol VLAN
- MAC VLAN
- Private VLAN
- L3 Features
- IPv4 / IPv6 static routing
- IPv4 interfaces: Up to 15
- IPv6 interfaces: Up to 15
- Routing table entries: IPv4: 32 max. / IPv6: 32 max.
- Default route entries: 1 (IPv4 / IPv6)
- ARP table (up to 512 entries)
- Inter-VLAN routing
- Multicast
- IGMP snooping v1, v2, v3
- MLD Snooping v1, v2
- IGMP/MLD fast leave and querier
- IGMP/MLD dynamic router port, and report suppression
- Multicast filtering
- Up to 256 multicast groups
- Access Control
- 802.1X authentication (Local, RADIUS IPv4/IPv6, TACACS+ IPv4/IPv6)
- 802.1X RADIUS/Guest VLAN assignment, MAC-based authentication
- DHCP snooping/binding
- Dynamic ARP inspection
- Port Security/MAC address learning restriction (Up to 256 entries per port)
- Denial of Service (DoS)
- Power
- Input: 100 – 240V AC, 50/60 Hz
- Max. consumption: 38.4W
- 3x Smart Fan Noise Level: 52.9 dBa (max.)
- Operating Temperature: 0° – 50° C (32° – 122° F)
- Dimensions: 440 x 270 x 44mm (17.3 x 10.63 x 1.73 in.)
- Rack mountable 1U height
- Weight: 3.82kg (8.42 lbs.)
- Certifications: CE, FCC, ETL
- Package Includes:
- 1x TEG-MGBS20
- Quick Installation Guide
- Lifetime Manufacturer’s Warranty
Product compare
Product warranty
Standard manufacturer warranty as applicable
Return policy
15 days return in original condition.
Price guarantee
!00% we are always lower than market price.
Explore branded collections
Our services

Partner with us

High business ethics and integrity

Consistence and focused performance

Shared vision and shared success

High confidentiality and security
-
See more
Design and build workplace, conference rooms & boardroom
-
See more
Managed IT service, help desks, servers, & networking
-
See more
Next generation devices assess, procure, customization
-
See more
Business continuity, security, backup & disaster recovery
-
See more
Cloud structure, migration, optimization and security
-
See more
Digitization, data retention, automation, Dev apps