Acerca del producto
The ELK-M1KAM is designed for access control from your Elk M1 system. It connects to the Elk four wire keypad bus and provides an interface for a 26 bit Weigand reader/keypad, Dallas ""One-Wire"" input, plus it has a FORM C relay for controlling door strikes, gate locks, etc.
The ELK-M1KAM has two built-in supervised inputs for door status sensor, RTE (request to exit) button or devices. It also has built-in switched outputs for ""System Ready, System Armed, Door Left Open"" conditions.
ELK-M1KAM M1 System Access Module Features:
- Connects to M1 keypad bus, compatible with M1EZ8 and M1Gold systems
- Input for Dalls ""one wire"" ibutton reader such as ELK-MA100
- Heavy duty Form ""C"" Relay output for door strikes or gate locks
- Low current switched negative output for ""Door Held Open
- Low current switched negative output for ""System Ready To Arm
- Low current switched negative output for ""System Armed
- Supervised input for RTE (request to exit)
- Supervised input for Door Status sensor
- Four selectable time settings for ""Request to Exit"" and ""Door Held Open
- Hardware Watchdog Circuit
- Operating voltage: 13.8VDC
- Current Draw: less than 30ma with min activity, 44 mA fully active
- Housing dimensions: 4.25"" x 6.375"" x 2.125
- Circuit board dimension: 3.95"" x 2.875"" x 0.95
- 1 Year Warranty
Especificaciones técnicas
The ELK-M1KAM is designed for access control from your Elk M1 system. It connects to the Elk four wire keypad bus and provides an interface for a 26 bit Weigand reader/keypad, Dallas ""One-Wire"" input, plus it has a FORM C relay for controlling door strikes, gate locks, etc.
The ELK-M1KAM has two built-in supervised inputs for door status sensor, RTE (request to exit) button or devices. It also has built-in switched outputs for ""System Ready, System Armed, Door Left Open"" conditions.
ELK-M1KAM M1 System Access Module Features:
- Connects to M1 keypad bus, compatible with M1EZ8 and M1Gold systems
- Input for Dalls ""one wire"" ibutton reader such as ELK-MA100
- Heavy duty Form ""C"" Relay output for door strikes or gate locks
- Low current switched negative output for ""Door Held Open
- Low current switched negative output for ""System Ready To Arm
- Low current switched negative output for ""System Armed
- Supervised input for RTE (request to exit)
- Supervised input for Door Status sensor
- Four selectable time settings for ""Request to Exit"" and ""Door Held Open
- Hardware Watchdog Circuit
- Operating voltage: 13.8VDC
- Current Draw: less than 30ma with min activity, 44 mA fully active
- Housing dimensions: 4.25"" x 6.375"" x 2.125
- Circuit board dimension: 3.95"" x 2.875"" x 0.95
- 1 Year Warranty
Comparación de productos
Garantía del producto
Garantía estándar del fabricante según corresponda
Política de devoluciones
Garantía de precio
!00% siempre estamos por debajo del precio del mercado.
Explora colecciones de marca
Colecciones
Nuestros servicios
