Acerca del producto
The ELK-P212S is a power supply and battery charger board providing up to 2A at 12VDC. It's perfect for providing power to panels or auxiliary devices like sirens, annunciators, keypads, motion detectors, zone expanders, etc. The outputs are protected by PTC self-resetting circuit breakers. Abnormal conditions (AC fail, low battery) are reported both by the RS232 connection for use with Elk panels, as well as by way of on-board relay outputs for use with other brand alarms, access control panels, etc.
Just add a 12VDC rechargeable battery up to 12aH, a power supply such as TP4016 and you're set.
- Regulated 12VDC Output with up to 2 Amps of current
- Energy Efficient ESMT - Elk Switch Mode Technology ensures low idle power
with maximum output headroom - Automatic output over-current protection (PTC)
- Master AC and Battery ON / OFF Power Switch
- Visual AC Power Indicator
- Innovative EBT - Elk Battery Technology circuit provides maximum battery life
- Controlled charge ramp and maintenance algorithm
- Low Battery cut-off protects battery from deep discharge
- M1 Control allows
- Remote power reset of powered peripherals
- Data-bus supervision of AC and Battery status
- Stand-alone flexibility
- Two (2) sets of DC outputs
- One (1) on-board relay to supervise battery status
- One (1) on-board relay to supervise AC status
- AC Input 16.5VAC 45 VA (TP4016)
- DC Output Voltage: 13.8 VDC +/- 5%
- Current Rating: 2A
- Auto Resetting PTC protected outputs
- Rechargeable battery supported: 12VDC up to 12AH
- Low battery cut-off ~ 10VDC
- Load regulation +- 2%
Especificaciones técnicas
The ELK-P212S is a power supply and battery charger board providing up to 2A at 12VDC. It's perfect for providing power to panels or auxiliary devices like sirens, annunciators, keypads, motion detectors, zone expanders, etc. The outputs are protected by PTC self-resetting circuit breakers. Abnormal conditions (AC fail, low battery) are reported both by the RS232 connection for use with Elk panels, as well as by way of on-board relay outputs for use with other brand alarms, access control panels, etc.
Just add a 12VDC rechargeable battery up to 12aH, a power supply such as TP4016 and you're set.
- Regulated 12VDC Output with up to 2 Amps of current
- Energy Efficient ESMT - Elk Switch Mode Technology ensures low idle power
with maximum output headroom - Automatic output over-current protection (PTC)
- Master AC and Battery ON / OFF Power Switch
- Visual AC Power Indicator
- Innovative EBT - Elk Battery Technology circuit provides maximum battery life
- Controlled charge ramp and maintenance algorithm
- Low Battery cut-off protects battery from deep discharge
- M1 Control allows
- Remote power reset of powered peripherals
- Data-bus supervision of AC and Battery status
- Stand-alone flexibility
- Two (2) sets of DC outputs
- One (1) on-board relay to supervise battery status
- One (1) on-board relay to supervise AC status
- AC Input 16.5VAC 45 VA (TP4016)
- DC Output Voltage: 13.8 VDC +/- 5%
- Current Rating: 2A
- Auto Resetting PTC protected outputs
- Rechargeable battery supported: 12VDC up to 12AH
- Low battery cut-off ~ 10VDC
- Load regulation +- 2%
Comparación de productos
Garantía del producto
Garantía estándar del fabricante según corresponda
Política de devoluciones
Garantía de precio
!00% siempre estamos por debajo del precio del mercado.
Explora colecciones de marca
Colecciones
Nuestros servicios
