Acerca del producto
The Shelly Wave 1 UL Long Range in-line Z-Wave device wires in behind most standard-sized wallboxes and transforms ordinary lights and appliances into Z-Wave Long-Range capable smart devices with up to a massive 1 mile of transmission distance.
Ideal for residential and commercial retrofitting, connects into a single device for remote on/off functionality, such as lightbulbs, IR heaters, electric locks and strikes, garage doors, irrigation systems and more. Supports switching of appliances up to 15A @ 110-240VAC or 10A @24-48/12VDC.
Selectable Z-Wave LR or Mesh networking supports a variety of installs—for smaller installs, Mesh networking increases the reliability of nearby or future Z-Wave sensors and devices; while Z-Wave LR transmission is optimized for large spaces like universities, hospitals, warehousing, and much more.
Supported by most major home hub systems, including Home Assistant, Home Centre 3, Jeedom, Homey, SmartThings, Hubitat and more. For additional compatibility information, consult Shelly’s compatibility listings.
For indoor use only. Consult wiring guide for device connection information. For inductive appliances that cause voltage spikes during switching on/off, such as electrical motors, fans, vacuum cleaners and similar ones, RC snubber (0.1 µF / 100 Ohms / 1/2 W / 600 VAC) should be connected parallel to the appliance.
SHELLY-WAVE-1LR-UL Specs and Features
- Power supply: 110-240 V AC / 24-48 V DC /12 V DC ± 10%
- Power consumption: < 0.3 W
- Max. switching voltage AC: 240 V
- Max. switching current AC: 15 A
- Max. switching voltage DC: 30 V
- Max. switching current DC: 10 A
- Overheating protection: Yes
- Distance Up to 40 m indoors: (131 ft.) (depends on local condition)
- Z-Wave® repeater: Yes
- CPU: Z-Wave® S800
- Z-Wave® frequency bands: 908.4 MHz
- Maximum radio frequency power transmitted infrequency band(s): < 25 mW
- Size (H x W x D): 37x42x16 ±0.5 mm / 1.46x1.65x0.63 ±0.02 in
- Weight: 26 g / 0.92 oz.
- Purpose of control: Operating
- Mounting: Flush mounting
- Construction of control: Independently mounted
- Screw terminals max. torque: 0.25 Nm / 2.2 lbin
- Conductor cross section: 1.0 to 2.5 mm² / 16 to14 AWG
- Conductor stripped length: 5 to 6 mm / 0.20 to 0.24 in
- Shell material: Plastic
- Color: Blue
- Type of Action: Type 1.B
- Overvoltage category: III
- Pollution degree: 2
- Impulse voltage: 4000 V
- Ambient temperature: -20°C to 40°C / -5°F to 105°F
- Humidity: 30% to 70% RH
- Max. altitude: 2000 m / 6562 ft
Especificaciones técnicas
The Shelly Wave 1 UL Long Range in-line Z-Wave device wires in behind most standard-sized wallboxes and transforms ordinary lights and appliances into Z-Wave Long-Range capable smart devices with up to a massive 1 mile of transmission distance.
Ideal for residential and commercial retrofitting, connects into a single device for remote on/off functionality, such as lightbulbs, IR heaters, electric locks and strikes, garage doors, irrigation systems and more. Supports switching of appliances up to 15A @ 110-240VAC or 10A @24-48/12VDC.
Selectable Z-Wave LR or Mesh networking supports a variety of installs—for smaller installs, Mesh networking increases the reliability of nearby or future Z-Wave sensors and devices; while Z-Wave LR transmission is optimized for large spaces like universities, hospitals, warehousing, and much more.
Supported by most major home hub systems, including Home Assistant, Home Centre 3, Jeedom, Homey, SmartThings, Hubitat and more. For additional compatibility information, consult Shelly’s compatibility listings.
For indoor use only. Consult wiring guide for device connection information. For inductive appliances that cause voltage spikes during switching on/off, such as electrical motors, fans, vacuum cleaners and similar ones, RC snubber (0.1 µF / 100 Ohms / 1/2 W / 600 VAC) should be connected parallel to the appliance.
SHELLY-WAVE-1LR-UL Specs and Features
- Power supply: 110-240 V AC / 24-48 V DC /12 V DC ± 10%
- Power consumption: < 0.3 W
- Max. switching voltage AC: 240 V
- Max. switching current AC: 15 A
- Max. switching voltage DC: 30 V
- Max. switching current DC: 10 A
- Overheating protection: Yes
- Distance Up to 40 m indoors: (131 ft.) (depends on local condition)
- Z-Wave® repeater: Yes
- CPU: Z-Wave® S800
- Z-Wave® frequency bands: 908.4 MHz
- Maximum radio frequency power transmitted infrequency band(s): < 25 mW
- Size (H x W x D): 37x42x16 ±0.5 mm / 1.46x1.65x0.63 ±0.02 in
- Weight: 26 g / 0.92 oz.
- Purpose of control: Operating
- Mounting: Flush mounting
- Construction of control: Independently mounted
- Screw terminals max. torque: 0.25 Nm / 2.2 lbin
- Conductor cross section: 1.0 to 2.5 mm² / 16 to14 AWG
- Conductor stripped length: 5 to 6 mm / 0.20 to 0.24 in
- Shell material: Plastic
- Color: Blue
- Type of Action: Type 1.B
- Overvoltage category: III
- Pollution degree: 2
- Impulse voltage: 4000 V
- Ambient temperature: -20°C to 40°C / -5°F to 105°F
- Humidity: 30% to 70% RH
- Max. altitude: 2000 m / 6562 ft
Comparación de productos
Garantía del producto
Garantía estándar del fabricante según corresponda
Política de devoluciones
Garantía de precio
!00% siempre estamos por debajo del precio del mercado.
Explora colecciones de marca
Nuestros servicios
-
Ver másDiseño y construcción de lugares de trabajo, salas de conferencias y salas de juntas.
-
Ver másServicio de TI administrado, mesas de ayuda, servidores y redes
-
Ver másDispositivos de próxima generación: evaluación, adquisición y personalización
-
Ver másContinuidad de negocio, seguridad, copias de seguridad y recuperación ante desastres
-
Ver másEstructura de la nube, migración, optimización y seguridad
-
Ver másDigitalización, retención de datos, automatización, aplicaciones de desarrollo
