Acerca del producto
The Shelly i4 DC is a compact, 4-input ZWave module that works with your compatible ZWave hub or automation software to report the status of each of the 4 inputs.
Once configured the Shelly Wave i4 DC can also be directly associated with other ZWave devices so that an input change can trigger an associated device or scene.
Your ZWave smart home hub can use the inputs to trigger routines or other scenes.
Shelly's Wave i4 DC has a built-in ZWave 800 series chip supporting S2 authentication for fast and secure communication. It's also backwards compatible with most older ZWave systems.
It can be powered by 5-24 VDC (power supply not included). It is an input only device. It does not have any relay outputs. It supports low voltage only. Does not work with AC power/line voltage—this is a low-voltage product only. It does not work with alarm panels, only ZWave hubs and software. Smart hub/gateway required for set up.
SHELLY-WAVE-I4-DC Specs and Features
- ZWave 800 series, compatible with previous ZWave generations
- Power Supply: 5-24VDC, less than 0.3W power consumption (power supply not included)
- 4 inputs with up to 4 separate actions; 4 scenes can be assigned per input for a total of up to 16 scenes/actions per device
- Up to 40m range (depending on environmental conditions)
- Each device acts as a repeater—strengthening the local ZWave network
- Mounts within standard wallbox
- Dimensions: 37 mm x 42 mm x 16 mm / 1.46’’ x 1.65’’ x 0.63’’
- Rated for Indoor Use Only
- -20 to -40C / -5 to 105F operating temperature
- ZWave S800 908.4 MHZ for North America
Especificaciones técnicas
The Shelly i4 DC is a compact, 4-input ZWave module that works with your compatible ZWave hub or automation software to report the status of each of the 4 inputs.
Once configured the Shelly Wave i4 DC can also be directly associated with other ZWave devices so that an input change can trigger an associated device or scene.
Your ZWave smart home hub can use the inputs to trigger routines or other scenes.
Shelly's Wave i4 DC has a built-in ZWave 800 series chip supporting S2 authentication for fast and secure communication. It's also backwards compatible with most older ZWave systems.
It can be powered by 5-24 VDC (power supply not included). It is an input only device. It does not have any relay outputs. It supports low voltage only. Does not work with AC power/line voltage—this is a low-voltage product only. It does not work with alarm panels, only ZWave hubs and software. Smart hub/gateway required for set up.
SHELLY-WAVE-I4-DC Specs and Features
- ZWave 800 series, compatible with previous ZWave generations
- Power Supply: 5-24VDC, less than 0.3W power consumption (power supply not included)
- 4 inputs with up to 4 separate actions; 4 scenes can be assigned per input for a total of up to 16 scenes/actions per device
- Up to 40m range (depending on environmental conditions)
- Each device acts as a repeater—strengthening the local ZWave network
- Mounts within standard wallbox
- Dimensions: 37 mm x 42 mm x 16 mm / 1.46’’ x 1.65’’ x 0.63’’
- Rated for Indoor Use Only
- -20 to -40C / -5 to 105F operating temperature
- ZWave S800 908.4 MHZ for North America
Comparación de productos
Garantía del producto
Garantía estándar del fabricante según corresponda
Política de devoluciones
Garantía de precio
!00% siempre estamos por debajo del precio del mercado.
Explora colecciones de marca
Colecciones
Nuestros servicios
