Acerca del producto
The TRENDnet 10-port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch is a hardened, gigabit switch with PoE+ (30W, 240W power budget) and support for 2x 100/1000Base-FX fiber SFP connections.
Ideal for managing connections on security systems, including PoE Alive Check which automatically restarts unresponsive PoE devices, minimizing hands-on administration for unresponsive cameras, alarm systems, etc.
Industrially hardened and designed for extreme environments—IP40 metal housing protects against mechanical and vibration damage, and a wide -40° – 75° C (-40° – 167° F) operating temperature can withstand harsh, industrial environments like workshops, warehouses and factories.
Advanced networking features like traffic management control, remote administrator troubleshooting and SNMP monitoring deliver high-end networking performance in a tough package.
DIN-rail mounted. Includes removable terminal block for power connection.
TI-PG103I Specs and Features
- Network Standards
- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.1ax
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3az
- IEEE 802.3af
- IEEE 802.3at
- Device Interface
- 8 x Gigabit PoE+ ports
- 2 x 100/1000Mbps SFP ports
- 6-pin removable terminal block (primary/RPS power inputs & alarm relay output)
- DIP switch
- LED indicators
- Reset button
- MIB
- MIB II RFC 1213
- Bridge MIB RFC 1493
- RMON (Group 1,2,3,9) RFC 2819 RFC 1757
- Spanning Tree
- STP (spanning tree protocol)
- RSTP (rapid spanning tree protocol)
- BPDU filter, guard, and root guard
- Performance
- Switch fabric: 20Gbps
- RAM buffer: 128MB
- MAC address table: 8K entries
- Jumbo frames: 10KB
- Forwarding rate: 14.88Mpps (64-byte packet size)
- Management
- HTTP web-based GUI
- CLI: Telnet / SSHv2
- SNMP v1, v2c, v3
- SNMP trap (up to 5 receivers)
- RMON groups 1/2/3/9
- Modbus TCP/IP
- Device configuration backup & restore, upgrade firmware, reboot, and reset to default
- Multiple administrative or read-only user accounts
- Enable or disable power saving mode per port
- Static MAC entries
- LLDP (Link layer discovery protocol)
- Topology Map
- ONVIF device discovery
- SNTP
- SMTP alert
- Syslog Multicast
- Port statistics/utilization
- Traffic monitor
- Port mirror: one to one, many to one
- Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
- Loopback detection Access Control
- DHCP relay/option 82
- SFP DDMI (Digital Diagnostic Monitoring Interface)
- 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
- ERPS (Ethernet Ring Protection Switching) G8032v2
- Link Aggregation
- Static link aggregation and dynamic LACP (Up to 3 groups)
- Power
- PWR (Primary) terminal input: 24 – 57V DC
- RPS (Redundant) terminal input: 24 – 57V DC
- Compatible power supply: TI-S12024 (120W), TIS24048 (240W), TI-S48048 (480W) sold separately
- Max. Consumption: 13W (no PoE load), 253W (full PoE load)
- Hive Cloud Management
- Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
- Multi-device management
- Provisioning through scheduled batch or configuration updates for multiple switches
- Event/hardware network monitoring (CPU/memory utilization)
- Configure features such as IP address settings VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
- Quality of Service (QoS)
- 802.1p Class of service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandwidth control per port
- Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
- VLAN
- 802.1Q tagged VLAN
- MAC-based VLAN
- Protocol VLAN
- Port isolation
- Up to 256 VLAN groups, ID range 1-4094
- Multicast
- IGMP snooping v1, v2, v3
- IGMP querier
- IGMP fast leave
- Up to 256 multicast groups
- Static multicast entries
- Access Control
- 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
- DHCP snooping/screening
- Trusted host/IP access list for management access
- Port Security/MAC address learning restriction (Up to 100 entries per port)
- Static/dynamic ARP inspection
- ACL
- Source/Destination MAC address
- Source/Destination IP address
- Source Interface
- VLAN ID
- EtherType
- TCP/UDP port 1-65535
- Special Features
- Netlite device discovery and map display in GUI
- Port security: MAC address learning restriction per port
- DHCP relay/option 82 & DHCP server snooping/ screening support
- Wide operating temperature range
- Redundant power inputs
- Alarm relay triggered by power failure
- Surge and ESD protection
- PoE
- PoE budget: 240W@48V DC input, 124W@24V Alarm Relay Output DC input
- 802.3at: Up to 30W per port
- PoE Mode A: Pins 1, 2, 3, and 6 for power
- PoE auto classification
- PoE port priority/power scheduling/PD alive check
- Over current/short circuit protection
- Terminal Block
- Redundant power inputs, alarm relay contact, 6 pin
- Wire range: 0.5 mm² to 2.5 mm²
- Solid wire (AWG): 12-26
- Stranded wire (AWG): 12-26
- Wire strip length: 10-11mm
- Enclosure
- IP40 rated metal enclosure
- Fanless passive cooling
- DIN-Rail mount
- Grounding point
- ESD (Ethernet) Protection: 8kV DC
- Surge (Power) Protection: 6kV DC
- MTBF
- 460,726 hours @ 25° C
- Operating Conditions
- -40° – 75° C (-40° – 167° F)
- Max. 95% non-condensing
- Dimensions & Weight
- 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
- 930g (2.05 lbs.)
- Certifications
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
- What's Included
- TI-PG103i
- Removable terminal block
- DIN-Rail mounting bracket
- Lifetime Manufacturer's Warranty
Especificaciones técnicas
The TRENDnet 10-port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch is a hardened, gigabit switch with PoE+ (30W, 240W power budget) and support for 2x 100/1000Base-FX fiber SFP connections.
Ideal for managing connections on security systems, including PoE Alive Check which automatically restarts unresponsive PoE devices, minimizing hands-on administration for unresponsive cameras, alarm systems, etc.
Industrially hardened and designed for extreme environments—IP40 metal housing protects against mechanical and vibration damage, and a wide -40° – 75° C (-40° – 167° F) operating temperature can withstand harsh, industrial environments like workshops, warehouses and factories.
Advanced networking features like traffic management control, remote administrator troubleshooting and SNMP monitoring deliver high-end networking performance in a tough package.
DIN-rail mounted. Includes removable terminal block for power connection.
TI-PG103I Specs and Features
- Network Standards
- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.1ax
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3az
- IEEE 802.3af
- IEEE 802.3at
- Device Interface
- 8 x Gigabit PoE+ ports
- 2 x 100/1000Mbps SFP ports
- 6-pin removable terminal block (primary/RPS power inputs & alarm relay output)
- DIP switch
- LED indicators
- Reset button
- MIB
- MIB II RFC 1213
- Bridge MIB RFC 1493
- RMON (Group 1,2,3,9) RFC 2819 RFC 1757
- Spanning Tree
- STP (spanning tree protocol)
- RSTP (rapid spanning tree protocol)
- BPDU filter, guard, and root guard
- Performance
- Switch fabric: 20Gbps
- RAM buffer: 128MB
- MAC address table: 8K entries
- Jumbo frames: 10KB
- Forwarding rate: 14.88Mpps (64-byte packet size)
- Management
- HTTP web-based GUI
- CLI: Telnet / SSHv2
- SNMP v1, v2c, v3
- SNMP trap (up to 5 receivers)
- RMON groups 1/2/3/9
- Modbus TCP/IP
- Device configuration backup & restore, upgrade firmware, reboot, and reset to default
- Multiple administrative or read-only user accounts
- Enable or disable power saving mode per port
- Static MAC entries
- LLDP (Link layer discovery protocol)
- Topology Map
- ONVIF device discovery
- SNTP
- SMTP alert
- Syslog Multicast
- Port statistics/utilization
- Traffic monitor
- Port mirror: one to one, many to one
- Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
- Loopback detection Access Control
- DHCP relay/option 82
- SFP DDMI (Digital Diagnostic Monitoring Interface)
- 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
- ERPS (Ethernet Ring Protection Switching) G8032v2
- Link Aggregation
- Static link aggregation and dynamic LACP (Up to 3 groups)
- Power
- PWR (Primary) terminal input: 24 – 57V DC
- RPS (Redundant) terminal input: 24 – 57V DC
- Compatible power supply: TI-S12024 (120W), TIS24048 (240W), TI-S48048 (480W) sold separately
- Max. Consumption: 13W (no PoE load), 253W (full PoE load)
- Hive Cloud Management
- Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
- Multi-device management
- Provisioning through scheduled batch or configuration updates for multiple switches
- Event/hardware network monitoring (CPU/memory utilization)
- Configure features such as IP address settings VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
- Quality of Service (QoS)
- 802.1p Class of service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandwidth control per port
- Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
- VLAN
- 802.1Q tagged VLAN
- MAC-based VLAN
- Protocol VLAN
- Port isolation
- Up to 256 VLAN groups, ID range 1-4094
- Multicast
- IGMP snooping v1, v2, v3
- IGMP querier
- IGMP fast leave
- Up to 256 multicast groups
- Static multicast entries
- Access Control
- 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
- DHCP snooping/screening
- Trusted host/IP access list for management access
- Port Security/MAC address learning restriction (Up to 100 entries per port)
- Static/dynamic ARP inspection
- ACL
- Source/Destination MAC address
- Source/Destination IP address
- Source Interface
- VLAN ID
- EtherType
- TCP/UDP port 1-65535
- Special Features
- Netlite device discovery and map display in GUI
- Port security: MAC address learning restriction per port
- DHCP relay/option 82 & DHCP server snooping/ screening support
- Wide operating temperature range
- Redundant power inputs
- Alarm relay triggered by power failure
- Surge and ESD protection
- PoE
- PoE budget: 240W@48V DC input, 124W@24V Alarm Relay Output DC input
- 802.3at: Up to 30W per port
- PoE Mode A: Pins 1, 2, 3, and 6 for power
- PoE auto classification
- PoE port priority/power scheduling/PD alive check
- Over current/short circuit protection
- Terminal Block
- Redundant power inputs, alarm relay contact, 6 pin
- Wire range: 0.5 mm² to 2.5 mm²
- Solid wire (AWG): 12-26
- Stranded wire (AWG): 12-26
- Wire strip length: 10-11mm
- Enclosure
- IP40 rated metal enclosure
- Fanless passive cooling
- DIN-Rail mount
- Grounding point
- ESD (Ethernet) Protection: 8kV DC
- Surge (Power) Protection: 6kV DC
- MTBF
- 460,726 hours @ 25° C
- Operating Conditions
- -40° – 75° C (-40° – 167° F)
- Max. 95% non-condensing
- Dimensions & Weight
- 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
- 930g (2.05 lbs.)
- Certifications
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
- What's Included
- TI-PG103i
- Removable terminal block
- DIN-Rail mounting bracket
- Lifetime Manufacturer's Warranty
Comparación de productos
Garantía del producto
Garantía estándar del fabricante según corresponda
Política de devoluciones
Garantía de precio
!00% siempre estamos por debajo del precio del mercado.
Explora colecciones de marca
Colecciones
Nuestros servicios
